Vanessa Coaster machine embroidery design
Our Vanessa coaster machine embroidery design is approximately 5.5 inches square. For this project you will need to have 8 inches fabric (we used cotton-linen blend in yellow color). Feel free to experiment with your favorite color.
COLOR CHART
Vanessa_01_01. 136780 stitches, 144.1 mm x144.2 mm. Hoop two layers of water-soluble (Vilene) stabilizer. Place your fabric (8 by 8 inches) on center and start embroidery:
- Light yellow
- STOP (do not change the thread) remove hoop, cut out squares and outer part of fabric, careful not to cut the stabilizer, refer to diagram 1. Continue embroidery
- White
- Blue
- Yellow
Once you are done with embroidery, soak coaster in the water, wash, flat dry and press from the back. Vanessa is ready for display!
* All designs and artwork are 100% authentic by Alinaline (alinaline.com) and are protected by copyright.
Reviews and questions concerning the project are welcome, please write them as comments bellow and we'll reply!
When you subscribe to the blog, we will send you an e-mail when there are new updates on the site so you wouldn't miss them.
Comments