Our Vanessa coaster machine embroidery design is approximately 5.5 inches square. For this project you will need to have 8 inches fabric (we used cotton-linen blend in yellow color). Feel free to experiment with your favorite color.
COLOR CHART
Vanessa_01_01. 136780 stitches, 144.1 mm x144.2 mm. Hoop two layers of water-soluble (Vilene) stabilizer. Place your fabric (8 by 8 inches) on center and start embroidery:
- Light yellow
- STOP (do not change the thread) remove hoop, cut out squares and outer part of fabric, careful not to cut the stabilizer, refer to diagram 1. Continue embroidery
- White
- Blue
- Yellow
Once you are done with embroidery, soak coaster in the water, wash, flat dry and press from the back. Vanessa is ready for display!
* All designs and artwork are 100% authentic by Alinaline (alinaline.com) and are protected by copyright.
Reviews and questions concerning the project are welcome, please write them as comments bellow and we'll reply!